CWH1 Micro Sawtooth Picture Hangers for Canvases on Stretchers

CWH1 Micro Sawtooth Picture Hangers for Canvases on Stretchers

£3.25 - £445.99
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

CWH1 Micro Sawtooth Picture Hangers for Canvases on Stretchers

CWH1 picture hangers were originally designed to hang printed canvases on stretcher frames.

They work equally well with wood and polymer picture frames. The little alignment guides speed accurate alignment on the frame.

CWH1 picture hangers can be fitted centrally on the top of smaller frames or in pairs, one each side, on larger frames. They hang on most pins, screws and hooks.

Subject to quality of installation, one CWH1 hanger should take a 2kg frame and a pair a 5kg frame.

The pressed-in ‘X’s’ help when measuring the spacing between the hangers for positioning the hooks on the wall. It can be helpful to use Post-its and mark them, not the wall – nail through and then tear off.

CWH1 hangers are 50mm x 46mm, 1mm steel, zinc plated. Holes & slots are 4.0mm.

CWH picture hangers are not designed to work with cord or wire.

Optional Screws (2 x Screws for each hanger):

4x13mm / 1/2":
• Total length approx. 14mm
• Thread length approx. 12.5mm
• Thread diameter approx. 3mm (4 Gauge)
• Head Diameter approx. 4.5mm

Please Note:
Pozi Head - For use with driver bit size No.1
(not suitable for phillips, this will simply round off the head)